A good news said that our powder (Fe-based metal alloy) got the praise from the end user regarding the quality and conforrmity. Meanwhile, coating performances are beyond the expectation. the customer is quite happy with it. Luoyang Golden Egret Geotools is specilized in powder manufacturing. The main products are Thermal spray powder (WC-based/CrC-based), metal alloy, welding materials and cast tungsten carbide.

[IPD Topics]We are IPD practitioners--Hardface Division Author:Peng Sun Auditor:Wang Li R&D is not only R&D department, it is the whole staff Market is not only for sales, it is a market for all employees Market-Based Innovation - Demand-Oriented Products can only have vigorous vitality if they fit the market. The six concepts of Xiamen Tungsten IPD system construction require us to fully fit the market, extensively collect market demand, combine the development strategy of the group company, carry out demand planning and management, lead the development of R&D projects, and make R&D projects better for the company. target service. R&D is an investment behavior - risk management No organization can achieve 100% correct R&D, but we must continue to improve the success ra

High Velocity Oxygen Fuel (HVOF) coating is a thermal spray coating process, which is used to improve or restore a component's surface (properties or geometry). This surface engineering technique better enables life extension of equipment by increasing erosion and wear resistance, and corrosion protection. there are some problems on coating when spray by HVOF as bleow: Coating bond fails at the surface Reason1: surface contaminant(oil, water, variant matter) Solution: keep parts clean, remove oil and preheat to 250°F(107℃) Reason2:Incorrect preparation of substrate suface Solution: Improve prepared surface profile by sandblasting or adding more threads for per inch(min=200-250Ra)

The 12th China tungsten and molybdenum industry conference was held from 4th Aug to 6th Aug in Gulin guangxi province. in this meeting, luoyang Golden Egret Geotools Co. Ltd was rewarded as "the most innovative breakthrough", which is the affirmateion of the research and development & production capacity of Golden, it's also the encourage of the further development of the company. the main products of Luoyang Golden Egret Co., Ltd are thermal spray powder, metal alloy, welding rod, welding flexiable rope and welding wires.

From July 26th to 28th, the system re-evaluation teacher of the IAM International Advanced Manufacturing Promotion Department of the Group rushed to Luoyang to conduct a three-day IAM evaluation system re-evaluation work. The re-evaluation work was presided over by Yu Yong, the manager of the Advanced Manufacturing Promotion Department. All three business divisions were awarded three-star certification, and four teams were awarded four-star certification. The establishment and operation of the IAM evaluation system aims to guide and promote the subsidiaries of Xiamen Tungsten Group to better implement the IAM management concept, learn and understand and apply IAM methods and tools, improve the level of advanced manufacturing, and promote the goal of Xiamen Tungsten International in the advanced manufacturing stage. This re-evaluation work mainly includes three contents: division level, team level and on-site management (trial evaluation), covering three major divisions including hard surface material division. During the on-site re-evaluation process, 5S, TPM, team construction, personnel skills and other modules were checked in detail. The re-evaluation judges pointed out the problems existing on the site one by one and put forward suggestions for improvement. The 5S management and the team construction of the Hard Surface Materials Division were commended. And the production process of thermal spray powder is strictly controlled. Aft

Cooperated with University for development and together to create great future-----Li Quan` an, the vice president of Henan University of Science and Technology, visit to CXTC Luoyang Plant On 13th May, Li Quan `an, the vice president of Henan University of Science and Technology, led team to visit our company for cooperation. Yang Yue, Generally Manager of CXTC and relevant department leaders together attended the event. Communication between company leaders and university Yang Yue warmly welcome Li Quan`an and his team, expressed his heartfelt thanks to the University for long-term care and support for development of Company, and made a detailed introduction to the teachers on the general situation of the enterprise, development history, staff training, future development direction of the enterprise and etc. Mr. Yang said that Henan University of Science and Technology has unique discipline advantages, and both had carried out fruitful work in relevant aspects and had broad cooperation prospect. He hope to strengthen exchanges and cooperation with Henan University and Technology in all aspects and hoped that they can provid

Thermal spray is a new technology of surface strengthening and protecting, is a great part of surface modification. As the development of science and technology, thermal spray technology has obtained extensive promotion and application on strengthening wear resistance of papermaking corrugator roll tooth surface. Corrugator roll is the core part of paperboard production line, it is a continuous wearing process of using it. it costs a lot to recover the surface of these parts. Recovering corrugator roll through thermal spray technology is more economic and will greatly extend service life of rolls, and could reach 3-6 times of Chromium plated layer. Thermal spray powder suitable for papermaking corrugator roll of Luoyang Golden Egret is mainly two kinds: WC-12Co and WC-10Co-4Cr series. The powder is consistent in composition and has a concentrated particle size distribution, stable apparent density, high sphericity. Spraying WC based powder on the surface of corrugator roll could form a coating with high hardness, great wear resistance, low porosity and low surface roughness, strongly increases the work life of corrugator rolls, lower the cost of surface treatment, which is more economic. 01. Product Series WC-12Co: GP12-2 (15-38um, apparent density 4.3-5.0g/cm3) GP12U-19 (5-30

XTC Luoyang is one of the leading suppliers of thermal spray materials, laser cladding powder, PTA powder and weld materials. Please kindly contact us if you are interested.

Wear Resistant Flux-cored Welding Wire High-hardness Wear Resistant Flux Cored Welding Wire for Shield Cutter Performance Analysis Cutter head of shield tunneling machine is divided into two layout forms as soft soil and hard rock according to different geological conditions. The cutter head layout of soft soil is serrated knife as basic, edge hob and scraper as auxiliary. Cutter head layer of hard rock is hob as basic and scraper as auxiliary. Cutter is an initial part of shield tunneling machine, reasonable selection, application, maintenance and replacement directly determines the quality, progress and cost of shield tunneling project. Damage forms of shield cutter mainly are furrow type abrasive wear, rolling wear, collapse and impact failure. It is necessary to u

Thermal spraying technology is a mature surface strengthening and protection technology and an important part of surface modification. With the development of science and technology, thermal spraying technology to improve the abrasion, corrosion, cavitation resistance of turbine blade in hydropower industry has obtained the good effect and popularization. For the operation condition of the existence both sediment erosion and erosion, surface strengthening is one of the best method to achieve high wear-resisting, anti-corrosion, cavitation resistance, and reduce the cost. 01-The powders sprayed on the turbine are mainly WC/10Co/4Cr series uniform composition, concentrated particle size distribution, stable apparent density, and good morphology. Forming a WC-based coating on the surface of the blade, greatly improving the life of the turbine, make sure the work efficiency and maintain the output power of turbine. Powder Series Grade Particle si

Dear Customers, Thanks for your support and trust to Luoyang Golden Egret all the time. Affected by market situation, main materials price rises sharply and materials supply is very tight. In order to ensure products` steady quality, fast delivery time and best service to all customers continuously, Luoyang golden Egret will focus on product innovation and service upgrading to meet customer`s requirement and bring more added value. Based on current market and operation situation, Luoyang Golden Egret decides to raise price for all hard facing material products from 6th April, 2022. We apologize for any inconvenience that will bring to you due to this price adjustment. Please contact our sales engineers to know more details. Luoyang Golden Egret looks forward to long term strategic partnership with all dear customers, and thanks for your support so we can face changing demand and market together. We promise to provide best quality of products and excellent service in return as always. Wish all a prosperous 2022! Yours Sincerely,

Thermal spray is a new technology of surface strengthening and protecting, is a great part of surface modification. As the development of science and technology, thermal spray technology has obtained extensive promotion and application all over the country, especially towards ball valves among petrochemical industry. For the situation where high temperature, high pressure and medium containing solid particles exist at the same time, hard sealed ball valve is a kind of commonly approved valve. Luoyang Golden Egret Hard Facing materials division has WC-10Co-4Cr.Cr3C2-25(NiCr) .WC-20Cr3C2-9Ni, mainly used for hard seal materials of ball valves. The powder is even in composition, with concentrated particle size distribution, stable apparent density, highly spherical shape. Applying with HVOF craft to form a WC based of Cr3C2 based coating structure on the surface of ball valves. The sealed face formed after process has a great abrasion and corrosion resistance, high temperature resistance and sealability, so as to extend the service life of ball valves. Inside water, gas and oil medium, the service life will be increased to 10-20 times, under the environment of severe wash-out, the service life could be increased to more than 5 times. For the three compositions of powder, we provide different grade, but the process is all the same: agglomerated and sintered. 01.

On 12th Mar 2022, the seminar regarding the New Year`s work was held at the office building. The top management and middle management attended the seminar. At the beginning of the seminar, each business unit reports the work plan of Y2022 and the key projects. The GM said every BU should embrace the annual target and maintain the business sustainable and incremental thinking and strive to achieve the goal of Y2022. Finally, the departments and BUs signed the key performance indicator with its superior. XTC Luoyang is one of the leading suppliers of thermal spray materials, laser cladding powder, PTA powder and weld materials. Please kindly contact us if you are interested.

Upon the arrival of March 8th, International Working Women's Day, in order to enrich the cultural life of women employees and show compassionate care, at the afternoon of Mar 5th, Luoyang Golden Egret labor Union held a cake DIY activity with the theme of Women's Day. 5 professional pastry chef have been invited to teach women employees how to make cakes, they explained some pastry knowledge and cake making process. Everyone completed smearing cream and mounting patterns. Ladies used fresh fruits, cream and chocolates to decorate the cakes with their own ideas, and all enjoyed the whole activity.Ladies all expressed their thanks to labor union since this activity is a special gift for women employees, left them a precious memory.

To improve comprehensive security ability, XTC Luoyang plant held a skill demonstration on December 7th 2021. There are two parts in the demonstration. One is theory test and another is practice test. The demonstration further enhanced the safety consciousness of security personnel to ensure the safety of the whole plant.

On January 26, XTC Luoyang plant hold 2021 year-ending summary up meeting i.e. 2022 New Year conference sponsored by the administration department. The conference is mainly awarded the outstanding Party members and party workers, advanced team and excellent employees and reviewed the key work reports. At the end of the conference, all attendants focused on annual strategic target to compose a new chapter.

In order to enrich the spiritual cultural life of employees and to promote communications among departments, develop team spirit and enhance group bonding strength. The company held the fourth [Golden Egret Cup" tug-of-war at the afternoon on Feb 10th, 2022. There are 5 teams joining the game, 8 male and 4 female of each team. During the tug-of-war, team members of each department did their utmost, the atmosphere is so tense both on and off the field. Rhythmic shouts and cheers filled the air over the playground and echoed for a long time. Especially at the point of victory or defeat, nobody gave in and stick out. Every team member is so cheered up, telling us the meaning of unity using their sweat, they touched everyone by their indomitable willpower and fighting spirit. The enthusiasm of cheering squads ran so high, shouted loudly to encourage, adding another dimension of color to the match. Hard Facing Materials Division team won the championship of the competition, Powder Process united with the 4th Alloy team won the runner up, Functional Platform team won the 3rd place.

In consideration of severe epidemic prevention status currently, in order to ensure the health or all the employees, and to answer the call of [vaccination of the 3rd booster shot" from Henan Disease Control. Luoyang Golden Egret general Party branch and Xindian Town health center launched the [I do practical things for the masses" and vaccination of [the 3td booster shot [activity on Dec 29th. The vaccination place arrangement is carried out by enterprise management department staff, according to the standards and process of vaccination environment, could meet the demand of current epidemic prevention. At 13:30 on Dec 29th, the vaccination activity officially began. All the departments and all the employees arrived at the first floor of office building one after another on the basis of <vaccination schedule>. Under the coordination of volunteers of each Party branch, all the employees followed the vaccination process and took temperature test, information registration, vaccination and observation, making sure the process is safe, scientific, effective and reasonable. After 4 hours constant work of medical staff and volunteers, vaccination of over 500 employees and part of family members have been accomplished.

Dear All, We've enjoyed CNY Holiday and resume work on 7th Feb 2022. Welcome contact us if you have business or interest on thermal spray materials (HVOF/HVAF/ID-SPRAY), laser cladding powder, PTA powder, welding rod, welding rope, and welding wire etc. Wish all a prosperous 2022! Best Regards, XTC Luoyang

Dear All, Our factory and office will close from 31st Jan to 6th Feb due to the Lunar New Year, and we will resume work on 7th Feb, 2022. Welcome send inquiries about Thermal Spray Materials, Laser Cladding Powder, PTA Welding Powder, and Welding Materials. Our sales managers will contact you within 24 hours once received your inquiry. All the best!

Since the generalization of IAM (international advanced manufacturing) in XTC group, the hard facing materials BU in Luoyang plant is adhering to the policy of "chasing quality products with quality work". Combining with lean production, the BU is committing to create IAM production line. There is a saying about the art of war: food and fodder should go ahead of troops and horses. Therefore the first is to equip the staff with the thinking of lean production, we are focusing on talent cultivation and getting a Six Sigma Green Belt certification and seven junior Lean master certifications. To control product quality, including process quality improvement and customer complaint improvement by using TQM(Total Quality Management) to ensure the process and final product quality. To improve the stability of the process quality effectively by DMAIC (Define, Measure, Analyze, Improve, Control), DOE (Design of experiment) and SPC (Statistical Process Control). For instance, the range difference of WC-10CO-4Cr is lower within 0.3. Meanwhile, we are establishing a quick feedback channel to ensure timely and effectively handle complains to lower it to 1.7%. Site improvement is well-regulated by carrying out the 5S and TPM. The application of IE seven techniques greatly reduces artificial errors and improve the efficiency. Among which, the producing lead time of thermal spraying powder is reduced to 10.8 days, which vastly meets the demand of orders. Lean production is persistent and the innovation is endless. We believe that we can win the customers` favor with quality service and quality products, we will take customer satisfaction as the purpose to keep improving.

XTC Cemented Carbide Grits and Pellets Introduction Among geology, mine, coal mining, and metro shield industries, workpieces need to have both excellent abrasion resistance and machinability but traditional abrasion resistant welding layer with high Chromium alloy cannot satisfy the service life and machinability requirement. Under this service condition and performance requirement, one of the most effective ways to improve abrasion resistance of welding layer is to add tungsten carbide grits or pellets into it. 1. Product Performance: 2. High abrasion resistance, corrosion resistance and high temperature resistance 3. Good wettability and weldability with Fe, Ni, Co and other self-fluxing alloy 4. Nice compressive resistance and tensile strength 2. Product Information Chemical Composition: WC-4Co, WC-6Co, WC-8Co, WC-12Co, WC-6Ni etc. Cemented carbide pellet: 20-30mesh, 30-40mesh, 60-100mesh, 100-270mesh;

In the petroleum exploration industry, drilling pump pressure is increasing continuously which make drill bits get erosion easily. The corresponding service conditions of drill bits are becoming more and more complex and bad, so there`s a higher requirement for further welding layer on drill bits. At present, the wear-resistant surfacing layer for PDC drill bits of petroleum drilling tools mainly relies on imported welding rope. The tungsten carbide flexible welding rope which developed by XTC Luoyang has an excellent corrosion resistance, wear resistance, and impact resistance has been successfully applied in this field. XTC hard alloy wear-resistant flexible welding rope has following characteristics: Product Composition and Characteristics Product Advantages Binder phase: Nickel-based alloy Low melting point